Brine Corrosion Inhibitor For Calcium Chloride Brine
Chloride compound brines are very corrosive fluids and cause uniform corrosion and pitting corrosion. This happens because of their high chloride content, brine form hydrogen chloride or HCL acid and cause severe corrosion. Chemtex’s Brine Corrosion Inhibitor for Calcium Chloride Brine, successfully minimizes corrosion in such high chloride brine systems.
Brine Corrosion Inhibitor for Calcium Chloride Brine prevents corrosion by forming an orgaanic film on the metal surface. It successfully prevents corrosion of carbon steel (LTCS, HTCS), mild steel, stainless steel (of all types), copper and copper alloys.Chemtex’s Brine Corrosion Inhibitor for Calcium Chloride Brine helps to prevent following consequences:-
- Leakage or burst in PHEs and tubes due to corrosion.
- Plugging and clogging of tubes with rust flakes and reduced flow rate
- Reduced heat transfer
- Fouling and de-coloring of brine HTF.
The chemical also contains a specific inhibitor to protect copper from corrosion and removes / prevents any sort of scale formation in the system.
|Application ||Brine System |
|Specification ||Chemical Type ||Organic Chemical Compound |
|Form ||Liquid |
|Specific Gravity ||Ranges from 1.0 – 1.2 depending upon product |
|pH ||12.5 + 1 |
|Solubility ||Completely Soluble in Brine |
|Dosage ||Brine Corrosion Inhibitor for Calcium Chloride Brine is normally fed continuously to the re-circulating closed system by injection dosing pump or dosed to the make-up tank. The amount of to inhibit corrosion depends on the type of system and plant operating conditions. The specific dosage rates will be specified by the Chemtex's technical representative. |
|Major Benefits ||Minimum loss of metal or corrosion |
|Excellent heat transferability and flow rate |
|Long and extended life of Brine without fouling |