Chemtex’s MEG Corrosion Inhibitor is a specially formulated chemical additive designed to prevent corrosion in multi-ways. It treats the surfaces of the metal making them less susceptible to corrosion. It buffers the organic acids formed as a result of glycol oxidation. Inhibited glycol based heat transfer fluids provides corrosion protection without reducing system’s heat transfer efficiency.

It is very important to use inhibitor in glycol system to prevent degradation of glycol. Glycol in presence to heat and air degrades into five organic acids namely: Glycolic Acid, Glyoxalic Acid, Formic Acid, Carbonic Acid & Oxalic Acid. Metal acts as catalyst in un-inhibited glycol solution for the formation of these acids, which then chemically attacks and corrodes system.

Also available Pre Inhibited Mono Ethylene Glycol and normal Mono Ethylene Glycol.

Mono Ethylene Glycol Brine Corrosion Inhibitor

Mono Ethylene Glycol Brine (MEG Brine) Corrosion Inhibitor

Brine Corrosion Inhibitor For Mono Ethylene Glycol
Chemtex’s Brine Corrosion Inhibitor for Ethylene Glycol is a specially formulated chemical additive designed to prevent corrosion in multi-ways. Brine Corrosion Inhibitor for Ethylene Glycol treats the surfaces of the metal making them less susceptible to corrosion. Brine Corrosion Inhibitor for Ethylene Glycol buffers the organic acids formed as a result of glycol oxidation.

Inhibited glycol based heat transfer fluids provides corrosion protection without reducing system’s heat transfer efficiency.

It is very important to use inhibitor in glycol system to prevent degradation of glycol. Glycol in presence to heat and air degrades into five organic acids namely: Glycolic Acid, Glyoxalic Acid, Formic Acid, Carbonic Acid & Oxalic Acid.

Metal acts as catalyst in un-inhibited glycol solution for the formation of these acids, which then chemically attacks and corrodes system.

Glycol Turns Reddish. What does this indicate?	Due to high corrosion in the heat transfer fluid system, the rust in the system metal makes the glycol turn red in colour. At this point the glycol is fouled with iron contaminants which increase the glycol degradation rate. It is very important to add corrosion inhibitor to the glycol system to avoid such degradation of glycol.
Application	Mono Ethylene Glycol System (MEG)
Specification	Chemical Type	Organic Chemical Compound
	Form	Liquid
	Freezing Point	Supercools
	VOC	Nil
	Solubility	Completely Soluble in Glycol and Water
Dosage	The amount of Brine Corrosion Inhibitor for Ethylene Glycol to inhibit corrosion depends on the type of system, application, brine concentration and plant operating conditions. The specific dosage rates and method will be specified by the Chemtex's technical representative.
Major Benefits	Zero or negligible loss of metal or corrosion Excellent heat transferability and flow rate Long and extended life of glycol without fouling Avoids leakage in the heat exchangers such as PHEs Maintains the anti-freezing properties of glycol Does not form sludge as in case of other mere pH buffers used in glycol

Send Business Enquiry

Chemtex Speciality Limited
Mr. Shubham Karnani
No. 33, Brabourne Road
Kolkata - 700 001, West Bengal, India

Contact via E-mail

Contact via SMS

Home | Profile | Our Products | Site Map | Contact Us