 |
|
Poly ElectrolyteChemtex’s Poly Electrolytes are organic compounds comprise a family of proprietary products, including anionic, cationic and nonionic emulsions and dry poly acryl amides, which can be used whenever liquid/solids separation is required in industrial applications. To meet the demands of various treatment applications, such as clarification and sludge dewatering, Chemtex’s polyelctrolyte products are available with different molecular weights, form and charge densities. Equivalent or even better than MAXFLOC T, MAXFLOC 20, MAXFLOC 30, MAXFLOC 502, MAXFLOC 504, MAXFLOC 506, MAXFLOC 507, MAXFLOC C-11, MAXFLOC C-21, MAXFLOC C-22, MAXFLOC C-31, MAXFLOC C-33, MAXFLOC A 106, MAXFLOC A 107, MAXFLOC A 108, MAXFLOC A 115 and MAXFLOC 301 from THERMAX; PERMAFLOC PC 306, PERMAFLOC PC 306 T and PERMAFLOC PC 603 T from NALCO; CHARGEPAC, DREWFLOC and AMERFLOC range of products from CHEMBOND ASHLAND; SOILSEP range of products from GE WATER etc.Application: - RO, NF, UF, MF Membranes | Specification | Properties | Unit | Typical Value | | Form & Appearance | - | Powder/Liquid | | Viscosity | mPa.s | Product Specific | | Specific Gravity | - | Product Specific | | pH | pH | Product Specific | | Solid Content | % | Product Specific | | Charge | - | Cationic/Anionic/Neutral | | Solubility in Water | % | 100 | - Chemtex’s Poly Electrolytes are dosed by diluting it with 10 - 40 times with water and then dosed into the waste water directly, after being mixed several minutes, waste is precipitated or air - floated and the water becomes clear. It is dosed exactly as per the dosage rate and method of MAXFLOC T, MAXFLOC 20, MAXFLOC 30, MAXFLOC 502, MAXFLOC 504, MAXFLOC 506, MAXFLOC 507, MAXFLOC C-11, MAXFLOC C-21, MAXFLOC C-22, MAXFLOC C-31, MAXFLOC C-33, MAXFLOC A 106, MAXFLOC A 107, MAXFLOC A 108, MAXFLOC A 115 and MAXFLOC 301 from THERMAX; PERMAFLOC PC 306, PERMAFLOC PC 306 T and PERMAFLOC PC 603 T from NALCO; CHARGEPAC, DREWFLOC and AMERFLOC range of products from CHEMBOND ASHLAND; SOILSEP range of products from GE WATER etc. Please refer to your CSL service engineer for exact product dosage. Key Features and Major Benefits:- - Decolorizing agent, COD decreasing
- Mainly used for color removal for dense color waste water
- Can be used to treat waste water from textile industry and dye houses, pigment industry, printing industry and paper industry
- Improved clarification
- Improved color removal
- Minimizes sludge volume
- Improved filter runs
- Improved settling and separation
- Improved floc size and formation
- Minimizes sludge
|
|
|
|
